WCDMA

Nokia Siemens 3G Flexi 2100MHz 50W Amplifier Circuit Analysis (Part 2 of 3)

3 Comments / Teardown / /

Introduction I have here a circuit analysis of a 2100 MHz cellular amplifier from a UMTS basestation setup. The initial teardown video can be found in Nokia Siemens 3G Flexi 2100MHz 50W Amplifier Teardown (Part 1 of 3). Video Cellular Basestation Overview The Nokia Siemens Networks FRGL module consists of two 50 Watt amplifier modules. […]

Nokia Siemens 3G Flexi 2100MHz 50W Amplifier Circuit Analysis (Part 2 of 3) Read More »

nokia siemens frgl rf amplifier 2100 mhz 50 watt

Nokia Siemens 3G Flexi 2100MHz 50W Amplifier Teardown (part 1 of 3)

5 Comments / Teardown / /

Teardown of a Nokia Siemens Networks Flexi Multiradio amplifier. This was for example used for mobile phone base station installations and this particular part is a 2×50 Watt FRGL amplifier. This have been in service as a 2 antenna system for mobile telecommunications. It is GSM / EDGE and WCDMA / HSPA capable. Nokia Siemens

Nokia Siemens 3G Flexi 2100MHz 50W Amplifier Teardown (part 1 of 3) Read More »

Nokia Siemens Flexi 3x90W FXEB 1800MHz Base Station Teardown: Power Amplifier (Part 2 of 2)

2 Comments / Teardown / /

This Nokia Siemens Networks Multiradio BTS FXEB module is a GSM 1800 MHz 90W amplifier module capable of GSM/EDGE, WCDMA/HSPA and LTE. If you missed part 1, see it here: Nokia Siemens Flexi 3x90W FXEB 1800MHz base station teardown: Power amplifier (part 1 of 2) Specifications The Flexi Multiradio Radio Frequency Module (FXxx) or RF

Nokia Siemens Flexi 3x90W FXEB 1800MHz Base Station Teardown: Power Amplifier (Part 2 of 2) Read More »

Huawei RRU3928 1800MHz Radio Base Station Circuit Analysis (part 2 of 2)

7 Comments / Teardown / /

The RRU3928 is an outdoor remote radio unit. It processes baseband and RF signal data. With the Software Defined Radio (SDR)technology, the RRU3928 supports the dual-mode operation of any two modes of GSM, UMTS, and LTE through software configuration modification. RRU3928 has a dual-transmitter and dual-receiver structure, which supports higher output power and carrier capacity.

Huawei RRU3928 1800MHz Radio Base Station Circuit Analysis (part 2 of 2) Read More »

Huawei RRU3928 1800MHz radio base station teardown (part 1 of 2)

1 Comment / Teardown / /

The RRU3928 is an outdoor remote radio unit. It processes baseband and RF signal data. With the Software Defined Radio (SDR)technology, the RRU3928 supports the dual-mode operation of any two modes of GSM, UMTS, and LTE through software configuration modification. RRU3928 has a dual-transmitter and dual-receiver structure, which supports higher output power and carrier capacity.

Huawei RRU3928 1800MHz radio base station teardown (part 1 of 2) Read More »

Nokia Siemens Flexi BTS Base Station Teardown: Circuit Analysis (Part 2 of 2)

1 Comment / Teardown / /

Circuit analysis of a Nokia Siemens Networks Flexi BTS base station. This have been in service as a 6 antenna GSM system for mobile telecommunications. GSM/EDGE, WCDMA/HSPA and LTE capable. 2×40 Watt output power. If you missed part 1, see it here: https://kaizerpowerelectronics.dk/teardown/nokia-siemens-flexi-bts-base-station-teardown-power-amplifier-part-1-of-2/ Filter Above picture shows the coaxial cavity band pass filter which in

Nokia Siemens Flexi BTS Base Station Teardown: Circuit Analysis (Part 2 of 2) Read More »

Nokia Siemens Flexi BTS base station teardown: Power amplifier (part 1 of 2)

4 Comments / Teardown / /

Teardown of a Nokia Siemens Networks Flexi BTS base station. This have been in service as a 6 antenna GSM system for mobile telecommunications. Part 2 with circuit analysis of the Nokia Siemens BTS RF circuits can be found on this link. This base station amplifier is capable of GSM/EDGE, WCDMA/HSPA and LTE at 2×40

Nokia Siemens Flexi BTS base station teardown: Power amplifier (part 1 of 2) Read More »

base station power amplifier RF

Ericsson Radio Base Station RBS3206 teardown

Leave a Comment / Teardown / /

The RBS3206 macro is an indoor Radio Base Station with one to four carriers and one to  six sectors at 20/40 Watt RF output power per carrier. All the boards that I have comes from the middle row in the above picture and unfortunately I did not have any of the diplexers at the top

Ericsson Radio Base Station RBS3206 teardown Read More »

Scroll to Top