750W Victron Solar Project – All 3 panels test – Part 2

In part 2 I test the setup with all 3 solar panels connected. A full production test in direct sunlight is conducted. If you missed the introduction to this project, check out 750 Watt Solar Project – Test Setup – Part 1. If you want to jump on to the further progress, check out 750W Victron Solar Project – Power wall and 8 days performance – Part 3 and 750W Victron Solar Project – 60 Days Performance – Part 4.

This solar panel project consists of:

3x 250W solar panels

1x Victron SmartSolar 100|30 MPPT battery charger

2x Norbatt 12V 150Ah batteries

1x 750W 24VDC to 230VAC inverter

Mads Barnkob

Electrician, programmer, experimenter and amateur scientist with experience in industry automation, programming and all kinds of high voltage generating electronics. Administrator of https://kaizerpowerelectronics.dk and the high voltage community forum https://highvoltageforum.net

View all posts by Mads Barnkob →

2 thoughts on “750W Victron Solar Project – All 3 panels test – Part 2

Leave a Reply

Your email address will not be published. Required fields are marked *