750W Victron Solar Project – Power wall and 8 days performance – Part 3

In part 3 I test the setup with all 3 panels connected and look at the performance over the last 8 days.

In part 1 you can see all the parts I pieced together and in part 2 there is the inital tests of the solar charger setup. It all consists of:

  • 3x 250W solar panels
  • 1x Victron SmartSolar 100|30 MPPT battery charger
  • 2x Norbatt 12V 150Ah batteries
  • 1x 750W 24VDC to 230VAC inverter

Mads Barnkob

Electrician, programmer, experimenter and amateur scientist with experience in industry automation, programming and all kinds of high voltage generating electronics. Administrator of https://kaizerpowerelectronics.dk and the high voltage community forum https://highvoltageforum.net

View all posts by Mads Barnkob →

One thought on “750W Victron Solar Project – Power wall and 8 days performance – Part 3

Leave a Reply

Your email address will not be published. Required fields are marked *