HSPA

Nokia Siemens 3G Flexi 2100MHz 50W Amplifier Circuit Analysis (Part 2 of 3)

3 Comments / Teardown / /

Introduction I have here a circuit analysis of a 2100 MHz cellular amplifier from a UMTS basestation setup. The initial teardown video can be found in Nokia Siemens 3G Flexi 2100MHz 50W Amplifier Teardown (Part 1 of 3). Video Cellular Basestation Overview The Nokia Siemens Networks FRGL module consists of two 50 Watt amplifier modules. […]

Nokia Siemens 3G Flexi 2100MHz 50W Amplifier Circuit Analysis (Part 2 of 3) Read More »

nokia siemens frgl rf amplifier 2100 mhz 50 watt

Nokia Siemens 3G Flexi 2100MHz 50W Amplifier Teardown (part 1 of 3)

5 Comments / Teardown / /

Teardown of a Nokia Siemens Networks Flexi Multiradio amplifier. This was for example used for mobile phone base station installations and this particular part is a 2×50 Watt FRGL amplifier. This have been in service as a 2 antenna system for mobile telecommunications. It is GSM / EDGE and WCDMA / HSPA capable. Nokia Siemens

Nokia Siemens 3G Flexi 2100MHz 50W Amplifier Teardown (part 1 of 3) Read More »

Nokia Siemens Flexi 3x90W FXEB 1800MHz Base Station Teardown: Power Amplifier (Part 2 of 2)

2 Comments / Teardown / /

This Nokia Siemens Networks Multiradio BTS FXEB module is a GSM 1800 MHz 90W amplifier module capable of GSM/EDGE, WCDMA/HSPA and LTE. If you missed part 1, see it here: Nokia Siemens Flexi 3x90W FXEB 1800MHz base station teardown: Power amplifier (part 1 of 2) Specifications The Flexi Multiradio Radio Frequency Module (FXxx) or RF

Nokia Siemens Flexi 3x90W FXEB 1800MHz Base Station Teardown: Power Amplifier (Part 2 of 2) Read More »

Huawei RRU3928 1800MHz Radio Base Station Circuit Analysis (part 2 of 2)

7 Comments / Teardown / /

The RRU3928 is an outdoor remote radio unit. It processes baseband and RF signal data. With the Software Defined Radio (SDR)technology, the RRU3928 supports the dual-mode operation of any two modes of GSM, UMTS, and LTE through software configuration modification. RRU3928 has a dual-transmitter and dual-receiver structure, which supports higher output power and carrier capacity.

Huawei RRU3928 1800MHz Radio Base Station Circuit Analysis (part 2 of 2) Read More »

base station amplifier RF

Ericsson Radio Base Station RBS6000 teardown

6 Comments / Teardown / /

The RBS 6201 two radio shelves can be equipped with virtually any combination of GSM, WCDMA and LTE, which are available for all common frequencies. A single radio shelf can provide up to 3×8 GSM or 3×4 MIMO WCDMA or 3×20 MHz MIMO LTE or a combination of above standards. The RUS supports 60 Watt output power for

Ericsson Radio Base Station RBS6000 teardown Read More »

Nokia Siemens Networks Flexi WCDMA Teardown: Antenna (part 3 of 3)

4 Comments / Teardown / /

Nokia Siemens Networks Flexi Multiradio BTS is a GSM/EDGE, WCDMA/(I-)HSPA, and LTE base station. Used in mobile telecommunication antenna networks. A network that you use daily on your cellphone. Part 1: System station and Part 2: Power amplifier Phased Antenna Array This is an obsolete Kathrein XPol 2-port single band panel antenna. The 2 ports means that

Nokia Siemens Networks Flexi WCDMA Teardown: Antenna (part 3 of 3) Read More »

base station amplifier RF diplexer

Nokia Siemens Networks Flexi WCDMA Teardown: Power Amplifier (Part 2 of 3)

9 Comments / Teardown / /

Nokia Siemens Networks Flexi Multiradio BTS is a GSM/EDGE, WCDMA/(I-)HSPA, and LTE base station for use in mobile telecommunication antenna networks. A network that you use daily on your cellphone. Part 1: System station and Part 3: Antenna The following 12 minute video shows the teardown step by step with explanations, high resolution pictures of

Nokia Siemens Networks Flexi WCDMA Teardown: Power Amplifier (Part 2 of 3) Read More »

Scroll to Top