Royer, Mazilli and ZVS drivers for flyback transformers and induction heaters. Marx generators and voltage multipliers. Photomultiplier tubes circuits.
Mazilli ZVS Flyback Driver
Introduction The Mazilli ZVS flyback driver is well-known throughout the high voltage community for its simplicity and ability to deliver 20-50 kV at high currents for a flyback transformer. I build this circuit almost a...
555 Audio Modulated Flyback
Introduction This is a audio modulated arc generator designed for simplicity rather than reliability, its made with very few and common components. There is however some serious trade offs described below in considerations. WARNING: sensitive...
2n3055 flyback driver
Introduction This driver is among the simplest, with just six components it will be able of delivering high voltage with a strong enough current for various experiments. There is also a push-pull version of this...
Floating waterbridge
WARNING!: Working with electricity is dangerous, all information found on my site is for educational purpose and I accept no responsibility for others actions using the information found on this site. Read this document about...
Simple plasma globe
Introduction When I first started experimenting with high voltage, flyback drivers were among the first supplies I built. I did a lot of weird experiments, but never got around to make a plasma globe since...
TL494 Flyback Driver
Introduction I wanted to design a versatile TL494 Flyback Driver circuit that could drive a half- or full-bridge of MOSFETs or IGBTs through a gate drive transformer (GDT). This should make a driver that is...
24 kV Marx generator
Introduction This was my first high voltage circuit that eventually led me into building other high voltage generators, supplies and Tesla coils. A Marx generator works by the principle of charging up a number of...
AGFA IUP3 Photomultiplier Tube Amplifier
Introduction The teardown of a AGFA ADC Compact Plus computed radiography developer became the basis for a range of reverse engineering projects. A complicated system like a automated developer for computed radiography has a lot...
Fujifilm PMT12A Photomultiplier Tube
Introduction The Fujifilm PMT12A photomultiplier tube module came from a teardown. The teardown of a Fujifilm FCR XG-1 X-ray image scanner for computed radiography, became the basis for this reverse engineering project. You can see...
Pingback: Huge Dielsel Generator at Thrige Power Station