maxwell slowmotion capacitor

Merlin Gerin 1600A vs. 10A Circuit Breaker 4000 FPS Slow Motion

This is a Merlin Gerin Masterpact M16N1 Circuit Breaker rated at 1600A/690VAC (Roughly 1.9MW 3-phase energy!) here is it tested against a C10A 1P+N MCB to withstand a 50kA short-circuit current from a 2500uF/2kV energy discharge capacitor!

The capacitor used is a Maxwell Energy Discharge capacitor that you can read about here

Some product series data and the full article with teardown and all pictures is found here:

The Masterpact M series circuit breaker is used to protect and control low voltage distribution systems. It can be installed in main LV switchboards (incoming units, main and secondary outgoers).
Nominal current: 800 to 6300A AC
Breaking capacity from 40 to 150 kA rms
Voltage rating: up to 690 V
Versions: 3 and 4-pole. Fixed or drawout.

Mads Barnkob

Electrician, programmer, experimenter and amateur scientist with experience in industry automation, programming and all kinds of high voltage generating electronics. Administrator of www.kaizerpowerelectronics.dk and the high voltage community forum www.highvoltageforum.net

View all posts by Mads Barnkob →

Leave a Reply

Your email address will not be published. Required fields are marked *